Nov 20
Bids in
20 days

UW Madison Babcock Hall Center for Dairy Research Plant Upgrades

Remodel
In general, the work consists of Contractor to procure, install and commission equipment, piping and instruments as outlined in the Contract Documents to provide new utility services to support existing aseptic dairy line equipment within Room 280 of the CDR. The new aseptic equipment is existing within Room 280 of CDR but will require final placement and alignment by the Contractor within the room based upon the Contract Documents. Utility systems to be provided will include a new Reverse Osmosis System, new Culinary Steam System including feedwater tank with pumps, electric boiler, blowdown system and Culinary Steam Filter Station. Culinary Steam will be distributed through both a low pressure and high-pressure culinary steam header to the aseptic equipment. Also included is a 10ºC closed loop chilled water system with a new plate and frame heat exchanger and pump, and a hot water distribution system including a steam shell and tube heater and distribution piping. Campus steam is used as the heating source for the hot water system and the campus ice water system is used as the cooling source for the 10ºC chilled water loop. All new utility equipment will be located in the 3rd floor penthouse area, directly above Room 280 and an interstitial space in between the two areas.

Status

Accepting Bids

Prebid Date 10/16/25 11:00am
Sub Bid Date 11/6/25 1:30pm
Bid Date 11/20/25 1:30pm

Company & Contacts

University of Wisconsin System Administration (UWSA)
Lindsay Woznick  
(608) 265-6462

Location

Madison WI.

Please Submit Bids to UWSA as indicated in the Spec Manual.

PRE-BID CONFERENCE: A pre-bid tour will be conducted at the site October 16, 2025 beginning at 11:00 AM. Participants should meet in the Babcock (Center for Dairy Research Atrium) building located at 1605 Linden Dr., Madison, WI. All bidders are highly encouraged to attend this Pre bid Conference / Building Tour and no separate tours will be conducted. The contact person is Jim Schliem at Foth Production Solutions Architecture Firm, 2121 Innovation Court, Suite 100, De Pere, Wisconsin, 54115, 608-320-0025.


It is the bidder’s sole responsibility to review the “Addenda” tab during the bidding process for new postings!

The Owner, Architect, General Contractor, Printer, or PlanRoom will not be responsible for bids or sub-bids based on single drawings, specification sheets or observation or use of partial sets of documents. It is the bidder’s sole responsibility to review & understand all project requirements prior to submitting a bid!

Planroom Help? eMail support@blueprintfdl.com or call 920-922-3592.